News and Trends
Query Terminal RGB Display Board for Bank Branch Lobby, WF-K3288, AndroidSBC, Stavanger
TL;DR: Query Terminal RGB Display Board for Bank Branch Lobby
AndroidSBC sourcing desk: touch query board pricing held flat through the current quarter serving Stavanger, Norway. The WF-K3288 self-service query terminal Android motherboard spans the legacy query terminal refresh with hall display and eleven sister models in the WF-K series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 1080p HDMI plus LVDS, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Stavanger and Norway importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
As a board-level manufacturer rather than a kiosk assembler, AndroidSBC gives Norway buyers the WF-K self-service query terminal motherboards without the cabinetry markup. The twelve-model family is produced in Longgang, Shenzhen, under one BOM discipline, and Stavanger integrators integrate it into their own enclosures and housings. Every model is validated on the same burn-in rig in Longgang before it is packed for Norway, and the same rig logs are available on request.
WF-K3288 Technical Specifications
| Parameter | AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) | Industry Average |
|---|---|---|
| Processor | RK3288 quad-core ARM Cortex-A17 1.8GHz SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-T764 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 2GB DDR3 | DDR3 1GB / 2GB on competing boards |
| Storage | 16GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | 1080p HDMI plus LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 10 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3288 (legacy query terminal refresh with hall display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Norway importers sourcing the WF-K family, the WF-K3288-A variant is the typical configuration for the installed-base query terminal refresh use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Norway Buyers
Buyers in Stavanger often treat a self-service query terminal as a commodity board, then discover that the printer driver, the card reader stack and the kiosk-mode lockdown each need separate validation against Norway deployment conditions.
There is also a documentation discipline problem. Many suppliers quote CE / Local Authority for Norway but cannot produce the underlying CE marking with the local radio interface notification evidence when a Stavanger integrator is audited mid-project. The factory answers with lot-level BOM control, so the Stavanger order of 45600 units is the 6th in a series that never re-qualifies the peripheral stack.
Competitive Comparison: WF-K3288 vs Competing Self-Service Query Terminal Android Boards
Against the query boards usually quoted in Norway, the WF-K board is positioned on integration completeness rather than on a single performance number for Stavanger.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
Query terminals are becoming the default front door for routine information requests. In Norway this is visible in tenders that bundle the legacy query terminal refresh with hall display with identity peripherals and printing, and Stavanger integrators are quoting against those bundles rather than against bare boards.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3288 and WF-K3600 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3600 and WF-K3601 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3601 over boards that re-spin silicon between lots.
The direction of travel for Stavanger is towards fewer board variants deployed across more sites, which is exactly the configuration the WF-K series was built around for Norway.
Partner Success Story: Northline Information Flow Group (multi-site service network operator)
The Northline Information Flow Group rollout in the North America service networks segment shows how the WF-K family from AndroidSBC supports Stavanger integrators. Northline Information Flow Group retrofitted 45600 query terminals onto existing kiosk housings.
- OEM relationship: AndroidSBC private-label SKU shipped with Northline Information Flow Group branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus CE / Local Authority conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Northline Information Flow Group VP Service Operations for North America Service Networks: Northline Information Flow Group kept the cabinets and changed the boards, since the WF-K matched the mounting pattern and the LVDS panel already present, so 45600 units were upgraded in Stavanger without touching the enclosures.
Field Report: installed-base query terminal refresh at a social security service hall
YANTIAN, Shenzhen, September 22, 2026 - Chu Lin, AndroidSBC field desk. Because Norway sites range from air-conditioned lobbies to unheated entrances, the WF-K3288 batch was cleared at both ends of the rated window. The WF-K3288 self-service query terminal Android motherboard order for Stavanger, Norway cleared the burn-in station on schedule and is en route via the Oslo - Shanghai lane.
The WF-K3288 legacy query terminal refresh with hall display production lot includes the WF-K3288-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Norway integrators, the CE marking with the local radio interface notification paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, YANTIAN, Shenzhen. Norway integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.
WF-K3288 Application Scenarios
The WF-K3288 legacy query terminal refresh with hall display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3288-A configuration is the typical build for the installed-base query terminal refresh use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K3288 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Stavanger.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K8801 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K3600 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K3601 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K3602 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Stavanger: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Stavanger Buyers
AndroidSBC structures Stavanger partnerships around how much integration the local partner keeps in house, with Norway projects typically choosing between three levels.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
For Stavanger integrators the choice usually comes down to how much of the Norway project the local team wants to own versus how much it wants the factory to carry.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support a legacy query terminal refresh with hall display?
Answer: Yes. The legacy query terminal refresh with hall display is covered by the standard WF-K driver SDK, which means the Stavanger integrator configures it rather than ports it.
What is the real difference between the RK3288 tier and the other silicon tiers in the WF-K family?
Answer: Practically, the RK3288 tier is chosen when the Norway use case matches its video and AI envelope. The interface contract is identical across the family, so the decision is about workload rather than about connectors or drivers.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Norway?
Answer: Yes, and the paperwork is treated as part of the product rather than an add-on. For Norway orders the CE, FCC, RoHS and REACH set is prepared alongside the production lot bound for Stavanger.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: MOQ is quoted per model rather than per family, so a Stavanger integrator can pilot one tier for Norway without buying across all twelve. Samples take 1-3 days and bulk lots 15-30 days.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes. AndroidSBC handles AOSP customisation, kiosk-mode lockdown and Linux images for the WF-K family, with the resulting build validated on the same rig used for Norway shipments to Stavanger.
How are software updates and long-term support handled on the WF-K family?
Answer: AndroidSBC maintains a seven-year firmware window on the WF-K family, with staged OTA and rollback. Stavanger partners can freeze a revision per Norway project and update on their own schedule.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes, and where a Stavanger seller runs its own 3PL arrangement in Norway, AndroidSBC ships to that warehouse on the same terms as a direct buyer order.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: AndroidSBC handles RMA and DOA replacements per production lot, which means a Stavanger partner can trace a failure back to a specific build shipped to Norway rather than dealing with an anonymous board.
Contact AndroidSBC: Start Your WF-K3288 Sourcing Conversation
Stavanger integrators can reach the AndroidSBC export desk for the WF-K self-service query terminal family through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to Norway buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-K family.